Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Houston, TX
Gate access control in Houston means retrofitting keypads, card readers, and intercoms onto gates that sit in some of the most punishing conditions in Texas. The city’s Beaumont clay soil heaves with every wet-dry cycle, pulling posts out of plumb and binding operators, while near-tropical humidity eats at wiring connections and control boards year-round. If your gate won’t respond to its keypad or your entry system died after the last storm, call (346) 253-3225. We diagnose the problem, write the price down, and fix it with the evidence to prove what was done.
Why Houston Homes Are Different
Houston’s housing stock is heavy with 1970s-through-2000s HOA subdivisions that built gated entries as private land-use controls, in a city that never adopted zoning. That means automated ornamental iron gates are everywhere, and they are now aging into their first and second major operator and hinge replacement cycles at the same time. On top of that, Houston’s Beaumont clay soil swells and contracts through the city’s extreme wet-dry swings, chronically shifting gate posts out of plumb. A gate that binds against its post today was likely square last spring. We see it in Meyerland, in Kingwood, in Brays Oaks, in Bellaire and beyond. Humidity routinely runs 85 to 95 percent in summer, so rust and scale on iron frames, hinges, and strike plates arrive faster here than in Dallas or Austin. And when the floods come, ground-level gate motors and control boards go under. Every gate company working Houston is, in practice, also in the flood-recovery and post-realignment business. The difference is whether they document what they found. We do.
Our Main Houston Services
Below are the three services Houston homeowners call us about most often, each with its own dedicated page covering local conditions, pricing, and what the work actually involves.
Gate Repair in Houston
Repair work in Houston usually comes down to one of three things: a post has drifted out of plumb in the clay, a hinge has rusted and sagged, or an operator has taken on water or failed after a power surge. We diagnose the actual cause before touching anything, then hand you a written price. That price covers parts, labor, and the fix itself. No discovery billing at the end. Read the full breakdown on our Gate Repair in Houston page.
Gate Installation in Houston
New gate installation in Houston has to account for what the ground will do after we leave. We set posts deep, pour against the clay’s movement, and spec hardware that won’t dissolve in the humidity. Whether it’s a single driveway gate or a community entrance, the process starts with a measured quote, not a guess. See what a full installation includes on our Gate Installation in Houston page.
Gate Motor & Opener in Houston
Houston’s flooding and humidity are hard on gate operators. Motors that sit at ground level in repeatedly flooded subdivisions like Meyerland often fail two or three times in a decade until someone raises the mounting bracket or adds a sealed enclosure. We service nine major automation brands and we’ll repair what’s on the property rather than steering you toward a replacement. Details on our Gate Motor & Opener in Houston page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Houston
Gate access control in Houston is about keeping a gate secure while letting the right people through, and the city’s housing stock makes that harder than it sounds. Thousands of HOA subdivisions built gated entries from the 1970s through the 2000s, and those original keypads, card readers, and phone-entry systems are now failing in Houston’s humidity or after repeated flood events. A control board that gets submerged even once often works intermittently for weeks before dying completely. That’s the problem we solve. This page covers the specifics; you can also read more on our Gate Access Control hub.
Keypad Entry
Signs you need it
Your keypad works intermittently, some buttons need hard presses, or it stops responding after rain.
What it costs in Houston
Keypad replacement or installation in Houston typically runs $185-$425, depending on whether it’s a standalone unit or tied into an existing access system.
How we do it
We test the existing wiring, install or replace the keypad, reprogram codes, and photograph the wiring before the faceplate goes back on.
Phone Entry
Signs you need it
Visitors call your phone line but can’t buzz the gate open, or the system rings endlessly with no connection.
What it costs in Houston
Phone entry installation or repair in Houston typically runs $400-$900, depending on whether we’re replacing a unit or adding phone entry to an existing gate.
How we do it
We verify the phone line or cellular module, replace the entry unit if needed, and test the open command from a live call before we leave.
What Gate Access Control Costs in Houston
| Item | Typical range in Houston |
|---|---|
| Keypad entry | $185-$425 |
| Phone entry | $400-$900 |
| Card reader or video intercom | $600-$1,800+ |
Can you add a keypad to an existing Houston gate that never had one?
Usually, yes. We tie the keypad into the operator’s accessory input, set a unique code, and test it through several open and close cycles. The written quote covers the keypad, wiring, and programming.
Why did my gate access system stop working after heavy rain?
Houston’s floods and humidity are the likely culprits. Water gets into ground-level control boards, corrodes terminals, and shorts connections. We diagnose the damage, replace only what failed, and recommend elevated or sealed enclosures where the flooding repeats. Call (346) 253-3225 for a written estimate.
Gate Parts & Welding in Houston
Gate parts and welding in Houston lean heavily on repair and reinforcement, because the city’s clay soil and humidity work against metal every single year. Posts drift, hinges rust, and welds crack as the ground shifts under the gate’s weight. The good news is that most failures are fixable with the right part and the right weld, and we document both so the next technician doesn’t have to guess. More detail lives on our Gate Parts & Welding hub.
Hinge Replacement
Signs you need it
Your gate drags on the ground, sags toward the latch, or squeals when it moves.
What it costs in Houston
Hinge replacement in Houston typically runs $150-$600, depending on the number of hinges and whether the post itself needs reinforcement.
How we do it
We unload the gate, cut or unbolt the old hinges, weld or bolt in new ones, and photograph the finished alignment before you test it.
Post Replacement
Signs you need it
Your gate post leans visibly, has rusted through at the base, or no longer holds the gate square.
What it costs in Houston
Post replacement in Houston typically runs $400-$1,500, based on post size, depth setting, and concrete or weld requirements.
How we do it
We set the new post below the clay’s movement line, pour against it, and document the depth and alignment before re-hanging the gate.
What Gate Parts & Welding Costs in Houston
| Item | Typical range in Houston |
|---|---|
| Hinge replacement | $150-$600 |
| Post replacement | $400-$1,500 |
| Custom welding repair | $150-$800 |
Can you weld a cracked gate frame in place, or does the gate have to come down?
Most cracks can be welded in place if we can safely reach both sides. Heavily rusted or misaligned frames sometimes need to be unloaded and squared on the ground first. The written quote covers either path.
How do you keep a welded repair from rusting again in Houston’s humidity?
We grind the weld clean, prime it, and coat it to match the existing finish. In repeatedly wet or flood-prone areas, we recommend sealing or elevating the affected parts. Call (346) 253-3225 for a written estimate.
Brands We Service in Houston
We service Linear, Viking, Ghost Controls, and DoorKing operators, along with five other major brands, and we keep common replacement parts in stock locally. Most Houston repairs are done in one visit. See our brands for the full list.
Pricing for Gate Repair in Houston, TX
| Service | Typical range in Houston |
|---|---|
| Keypad entry | $185-$425 |
| Phone entry | $400-$900 |
| Card reader or video intercom | $600-$1,800+ |
| Hinge replacement | $150-$600 |
| Post replacement | $400-$1,500 |
| Custom welding repair | $150-$800 |
What pushes a Houston gate repair toward the top of a range is usually the condition of the surrounding structure. A post that has drifted in the clay or a frame rusted after years of 90 percent humidity adds labor and material before the actual fix begins. That’s also why every job starts with a written price handed to you before any work starts. You’ll never see an invoice higher than the quote you approved.
Neighborhoods We Serve in Houston
We dispatch Houston crews across the metro, from the older HOA subdivisions on the west side to the flood-recovery work in the east and northeast.
- Meyerland
- Kingwood
- Brays Oaks
- Bellaire
- The Heights
Most Houston calls get same-day or next-day scheduling, with the exception of custom welding or post setting, which we schedule around concrete cure time and materials.
Service Area - Cities Near Houston
Our Houston crews also serve the surrounding cities, including Pasadena, TX, Bellaire, TX, Deer Park, TX, and Pearland, TX. Dispatch and scheduling are coordinated from our Houston office, so you’ll get a local technician with local knowledge of the soil, the humidity, and the flood history that affects gate work here.
Serving Houston, TX - Our Local Coverage Area
We’re based in the Houston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Houston
Most repair calls in Houston can be scheduled same-day or next-day. Custom welding, post setting, and some access-control work may take a day or two longer because of material availability and concrete cure time. When you call, we’ll give you a written time window, not a vague promise.
If your gate is part of a community entrance or governed by an HOA, yes, you likely need approval before we start. For individual driveway gates, it depends on your deed restrictions. We’re glad to work from an approved scope, and the written price we give you meets the documentation most HOAs want.
Under our 365-Day Done Right Promise, if the repair is not right, we make it right, no argument, no fee, and no expiration within that year. That’s the same promise on a hinge replacement in Meyerland or a post set in Kingwood. Call (346) 253-3225 for a free estimate on any gate repair in Houston.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Houston Customers Say
"Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.